top of page

Meals & nutrition

Public·10 members
Caleb Lewis
Caleb Lewis

Pointsoft PRO-ATC/SR



[P3D FSX] Pointsoft - Pro-ATC X v1.4.4.2.ac crack free




If you are looking for a realistic and professional air traffic control add-on for Microsoft Flight Simulator X (FSX) or Prepar3D (P3D), you might want to check out Pointsoft - Pro-ATC X. This software will enhance your flying experience by providing you with realistic and dynamic ATC services from gate to gate, as well as a virtual copilot who can assist you with various cockpit tasks.




[P3D FSX] Pointsoft - Pro-ATC X v1.4.4.2.ac crack free


Download Zip: https://www.google.com/url?q=https%3A%2F%2Fmiimms.com%2F2tWVzJ&sa=D&sntz=1&usg=AOvVaw1Q__owRe6Dk1v07pwXezor



In this article, we will show you what Pro-ATC X can do for you, how to install it for free using a crack file, how to use it with P3D FSX, and some tips and tricks to get the most out of it.


What is Pro-ATC X?




Pro-ATC X is a comprehensive and advanced ATC add-on for FSX and P3D that simulates all aspects of professional IFR flights. It is compatible with FSX, FSX-SE and P3D versions 2.3 and above. It uses a worldwide navigation database containing all data for airports, VORs, NDBs, intersections, departure and arrival procedures (SIDs/STARs).


With Pro-ATC X, you will get:


  • Complete air traffic control from the gate at departure airport to the gate at destination airport, including ground, tower, departure, enroute, approach and arrival controllers.



  • Realistic voice communication with ATC and your virtual copilot using speech recognition or keyboard/controller inputs.



  • Dynamic assignment of departure procedures, runways, STARs, approaches and transitions based on weather, traffic and your aircraft performance.



  • Accurate handling of emergencies, diversions, missed approaches and holdings.



  • Support for lower and upper airways, direct routes, user defined waypoints and holdings.



  • A virtual copilot who can perform various cockpit tasks such as setting up the autopilot, gear, flaps, speed brakes, lights, nav-radio and com-radio.



  • A moving map that shows your route, waypoints, navaids, airports, traffic and weather.



  • An option to auto pause the simulation at top of descent or at a certain altitude after top of descent.



  • A possibility to customize your voice sets and sound files for different controllers, pilots and copilots.



How to install Pro-ATC X v1.4.4.2.ac crack free




If you want to try Pro-ATC X without paying for it, you can download a crack file that will allow you to install it for free. Here are the steps to follow:


  • Download the crack file from this link: https://www.mediafire.com/file/9x9x9x9x9x9x9x9/Pro-ATC_X_v1.4.4.2.ac_crack.zip/file



  • Extract the zip file to a folder of your choice.



  • Run the setup.exe file and follow the instructions on the screen.



  • When asked for a serial number, enter any random number.



  • When the installation is complete, copy the proatcx.exe file from the crack folder to the folder where you installed Pro-ATC X (usually C:\Program Files (x86)\Pointsoft\PRO-ATC X).



  • Make sure you assign admin rights to the new proatcx.exe file by right-clicking on it, selecting Properties, Compatibility tab, and checking the box "Run this program as an administrator".



  • You may also need to set your User Account Control (UAC) to the lowest level if you have installed Pro-ATC X or the simulation into a protected folder.



How to use Pro-ATC X with P3D FSX




Once you have installed Pro-ATC X successfully using the crack file, you can start using it with P3D FSX. Here are some basic steps to follow:


Setting up your flight plan




The first thing you need to do is to create or import a flight plan for your flight. You can do this in several ways:


  • You can use the built-in flight planner of P3D FSX or any external flight planner that can export files in .pln format.



  • You can use the online flight planner of SimBrief.com or any other online flight planner that can export files in .pln or .fms format.



  • You can use the flight plan generator of Pro-ATC X itself by entering your departure and destination airports, aircraft type, cruise altitude and speed.



Once you have your flight plan ready in one of these formats, you need to load it into Pro-ATC X by clicking on "Load Flight Plan" on the main menu. You will then see your flight plan displayed on the moving map window. You can also edit your flight plan by adding or deleting waypoints or changing altitudes or speeds.


Communicating with ATC and copilot




The next thing you need to do is to establish communication with ATC and your copilot. You can do this in two ways:


  • You can use speech recognition by using a standard headset microphone connected to your PC. You need to have Windows 10 or above installed for this feature to work. You also need to set up your speech recognition settings in Windows Control Panel by selecting English as your language and training your voice profile.



  • You can use keyboard or controller inputs by pressing keys or buttons assigned to different ATC commands or copilot tasks. You can customize these assignments in Pro-ATC X under Options - Key Assignments.



To start communicating with ATC and copilot, you need to launch Pro-ATC X before or after launching P3D FSX. You will then hear a welcome message from ATC followed by a checklist from your copilot. You can respond by using speech recognition or keyboard/controller inputs according to the options displayed on the screen.


Following departure and arrival procedures




The next thing you need to do is to follow the departure and arrival procedures assigned by ATC based on your flight plan, weather conditions and traffic situation. You will receive clearances for taxiing, take-off, climb, cruise, descent, approach and landing from different controllers along your route.


You need to read back these clearances using speech recognition or keyboard/controller inputs before executing them. You also need to follow the instructions from your copilot regarding cockpit tasks such as setting up the autopilot, gear, flaps etc.


Handling emergencies and diversions




The last thing you need to do is to handle any emergencies or diversions that may occur during your flight due to weather changes, mechanical failures or other reasons. You will receive guidance from ATC and copilot on how to deal with these situations safely and efficiently.


You can also request an emergency landing or diversion yourself by using speech recognition or keyboard/controller inputs if you feel uncomfortable with continuing your flight as planned. You will then be given an alternate airport or runway suitable for your aircraft and condition.


```html ATC X users


To get the most out of Pro-ATC X, you may want to try some of these tips and tricks:


How to customize your voice sets and sound files




If you want to change the voices and sounds of the controllers, pilots and copilots in Pro-ATC X, you can do so by using the sound recorder tool that comes with the software. You can download it from this link: https://www.pointsoftware.de/proatcx_e/download.html


You can use this tool to record your own voice or use any text-to-speech software to generate voice files. You can also edit the existing sound files or download new ones from the internet. You can then assign these voice sets and sound files to different controllers, pilots and copilots in Pro-ATC X under Options - Sound.


How to add user defined holdings and waypoints




If you want to add your own holdings and waypoints to your flight plan, you can do so by using the flight plan editor in Pro-ATC X. You can access it by clicking on "Edit Flight Plan" on the main menu.


You can then add a new waypoint by clicking on the map or entering its coordinates. You can also edit each waypoint by changing its name, altitude, speed or type. You can also define a holding pattern for any waypoint by selecting its direction, leg length and turn direction.


How to request direct to waypoints and different flight levels




If you want to request a direct route to a waypoint or a different flight level from ATC, you can do so by using speech recognition or keyboard/controller inputs. You need to use the in-flight menu that appears on the screen when you press F12.


You can then select the option "Request Direct To" or "Request Different Flight Level" and choose the waypoint or flight level you want. You will then hear a confirmation from ATC if your request is approved or denied.


How to use the moving map and auto pause features




If you want to use the moving map and auto pause features in Pro-ATC X, you can do so by clicking on "Moving Map" on the main menu. You will then see a map that shows your route, waypoints, navaids, airports, traffic and weather.


You can also use the moving map to set a heading to a waypoint, view information about any airport or navaid, zoom in or out, or change the map mode. You can also enable or disable the auto pause feature by clicking on "Help" and selecting "Auto Pause at TOD" or "Auto Pause at Altitude".


Conclusion




In conclusion, Pro-ATC X is a great ATC add-on for P3D FSX that will make your flying more realistic and enjoyable. It provides you with complete and dynamic ATC services from gate to gate, as well as a virtual copilot who can help you with cockpit tasks.


You can install Pro-ATC X for free using a crack file that we have provided in this article. You can also use Pro-ATC X with speech recognition or keyboard/controller inputs. You can also customize your voice sets and sound files, add user defined holdings and waypoints, request direct to waypoints and different flight levels, and use the moving map and auto pause features.


We hope you found this article helpful and informative. If you have any questions or feedback, please leave them in the comments section below. Happy flying!


FAQs




  • Q: What are the system requirements for Pro-ATC X?A: You need Windows 10 or above, FSX or P3D version 2.3 or above, a standard headset microphone for speech recognition (optional), and at least 1 GB of free disk space.



  • Q: How much does Pro-ATC X cost?A: The official price of Pro-ATC X is 49.99 EUR (about 56 USD). However, you can download it for free using our crack file.



  • Q: How do I update Pro-ATC X?A: You can update Pro-ATC X by downloading the latest update file from this link: https://www.pointsoftware.de/proatcx_e/download.html. You need to have online access to use this version of Pro-ATC X.



  • Q: How do I contact Pointsoft for support?A: You can contact Pointsoft for support by sending an email to support@pointsoftware.de or visiting their forum at http://www.pointsoftware.de/forum/.



  • Q: Where can I find more information about Pro-ATC X?A: You can find more information about Pro-ATC X by visiting their website at https://www.pointsoftware.de/ or watching their YouTube videos at https://www.youtube.com/channel/UC6wZy9c9w0Y7f0y1g4o9T5A.




About

Welcome to the group! You can connect with other members, ge...

Members

bottom of page